For information:
Power Sales
Schutte & Koerting
2510 Metropolitan Drive
Trevose, PA  19053  USA
Tel: 215-639-0900
Fax:  215-639-1597
Email:  sales@s-k.com


Valve Refurbishment

Dual Plug Valve

Dual Plug Valves are heavy service valves and are mounted between two oil coolers inside a reservoir tank. These valves are simple in design and are usually submerged - therefore they are not subject to the effects of corrosive conditions. Maintenance is limited to periodically oiling the hammer blow handwheel at the oil hole and replacing washers and seals. The only other moving part is the plug which is lubricated by the flowing media. 

When ordering refurbishment services be sure to give all the data on the valve reference plate, the number of the sectional illustration, and piece list forming part of this bulletin. Also, the name and number of the parts required as numbered and described.


Key Dual Plug Valve parts inspected to original specifications include: 1. Plug 2. Lifting spindle

DUAL PLUG VALVE PARTS LIST
REFERENCE PURPOSES ONLY

1
BODY
2
PLUG
3
PIN
4
EXTENSION COVER
5
SPECIAL PIN
6
WASHER
7
COTTER PIN
8
LIFTING SPINDLE
9
TANK FLANGE
10
STOP RING
11
RETAINING PLATE
12
RD. HD. SCREW
13
HDL. SET SCREW
14
COLLAR WITH LUG
15
LIFTING BUSHING
16
SPECIAL WASHER
17
HANDWHEEL
18
FILL. HD. SCREW
19
TURNING PLATE
20
HEX NUT
21
LIFTING PLATE
22
FILL. HD. SCREW
23
HANDWHEEL
24
KEY
25
STOP PIN
26
SEAL
27
VENT PIPE
28
SUPPORT STRAP
29
CAPSCREW
30
LOCK WASHER
31
CAPSCREW
32
COVER
33
PIPE PLUG


© Copyright Schutte & Koerting, 2007

Schutte & Koerting • 2510 Metropolitan Dr, Trevose PA 19053, USA • Tel: (215) 639-0900, Fax: (215) 639-1597